Issues

• Request Support for STM32C562

  renode/renode#1024 · Filter by author DamianSuess opened on Oct 3, 2026

• STM32_Timer: any write to EGR acts as UG, and CCxG bits do nothing

  renode/renode#1023 · Filter by author beber007 opened on Oct 2, 2026

• NXP_FlexCAN: RX mask is applied unshifted to standard IDs, so every standard frame lands in the first empty message buffer

  renode/renode#1022 · Filter by author talhailyas94 opened on Oct 2, 2026

• Cortex-M: NVIC.Reset() does not clear its BASEPRI copy, so interrupts stay masked after machine Reset

  renode/renode#1021 · Filter by author raulmoranguerra opened on Oct 1, 2026

• VeeR_EL2 / VeeR_EL2_PIC: support fast interrupt redirect (FAST_INTERRUPT_REDIRECT=1): capture claim into meihap when the interrupt is taken

  renode/renode#1020 · Filter by author marekvi95 opened on Oct 1, 2026

• RISC-V: tlib_raise_interrupt leaves exception_index set; VeeR_EL2 internal timer interrupts taken as synchronous exception 29 in multi-core machines

  renode/renode#1019 · Filter by author marekvi95 opened on Oct 1, 2026

• NRF52840_SPI should read EnabledState instead of taking a bool

  renode/renode#1018 · Filter by author DavidVentura opened on Sep 29, 2026

• NRF52840_Radio events are late by up to one global quantum

  renode/renode#1017 · Filter by author DavidVentura opened on Sep 29, 2026

• NRF52840_PPI triggers late

  renode/renode#1016 · Filter by author DavidVentura opened on Sep 29, 2026

• NRF52840_GPIO LATCH/DETECT do not work as expected

  renode/renode#1015 · Filter by author DavidVentura opened on Sep 29, 2026

• NRF52840_UART should read EnabledState instead of taking a bool

  renode/renode#1014 · Filter by author DavidVentura opened on Sep 29, 2026

• WebSocket terminal stops reading after an empty message

  renode/renode#1013 · Filter by author backer-and opened on Sep 29, 2026

• BaseCPU: end-of-round realtime catch-up sleeps the whole backlog in one uninterruptible call (minutes-long freezes)

  renode/renode#1011 · Filter by author DonavanMartin opened on Sep 17, 2026

• STM32_Timer: capture/compare channels keep their construction-time frequency when the counter's clock changes

  renode/renode#1010 · Filter by author DonavanMartin opened on Sep 17, 2026

• STM32H7_RCC: resetting a peripheral through RCC drops the clock frequency the RCC had derived for it (TIM12 runs 3.9x too fast)

  renode/renode#1009 · Filter by author DonavanMartin opened on Sep 17, 2026

• Sleeper.Sleep busy-waits for sub-millisecond sleeps — idle CPU thread pinned at 100% host CPU with the default 100 µs quantum

  renode/renode#1008 · Filter by author DonavanMartin opened on Sep 17, 2026

• STM32_Timer: a compare value of 0 never matches (firmware waiting on CCRx == 0 hangs forever)

  renode/renode#1007 · Filter by author DonavanMartin opened on Sep 17, 2026

• GaislerAPBUART: Stale data in the TX path

  renode/renode#1005 · Filter by author rohel01 opened on Sep 16, 2026

• NVIC SysTick: enabling the counter does not load it from RELOAD

  renode/renode#1004 · Filter by author wicanr2 opened on Sep 16, 2026

• STM32_Timer: counter period is ARR instead of ARR + 1; OCxPE not implemented; PWM outputs idle until the first overflow

  renode/renode#1003 · Filter by author wicanr2 opened on Sep 16, 2026

• Cortex-M: MOV (register) T3 with SP as source (mov.w <Rd>, sp) raises UNDEFINSTR

  renode/renode#1002 · Filter by author notlochness opened on Sep 16, 2026
  2

• Ad-hoc-compiled peripheral instantiation hangs indefinitely on Cortex-M platforms via LoadPlatformDescriptionFromString — built-in classes with identical shape work fine

  renode/renode#1001 · Filter by author DonavanMartin opened on Sep 16, 2026

• STM32_Timer: EGR.UG does not load the ARR preload value, so an ARPE=1 period only takes effect after the old limit

  renode/renode#1000 · Filter by author wicanr2 opened on Sep 16, 2026

• STM32F4 bxCAN: HAL_CAN_Init() times out because INRQ is ignored while SLEEP is still set

  renode/renode#999 · Filter by author wicanr2 opened on Sep 16, 2026

• STM32 HAL CAN initialization sequence problems with Renode STMCAN.cs

  renode/renode#998 · Filter by author eralp-calhan opened on Sep 11, 2026